Mul­ti­func­tion con­troller – HE 5697 MFC

The alternative to PLC

 

Create complex flow control yourself

PC-Tool with over 100 ready-made function blocks

Simulation function for smooth commissioning

Fast processor

multiple communication interfaces

 

 

 

Produkt anfragen

 

 

Mul­ti­func­tion con­troller – one for all!

Pro­gram­ma­ble logic con­trollers are, in a sense, the brains of the mod­ern fac­tory. But not all tasks require a full-fledged PLC. With the mul­ti­func­tion con­troller, HESCH has there­fore devel­oped a mod­ern con­troller plat­form for indus­trial processes that closes the gap between a stan­dard con­troller and the PLC.

 

Your process engi­neers think in func­tion blocks – so does the HESCH mul­ti­func­tion con­troller! With the HESCH mul­ti­func­tion con­troller, your process engi­neer can map com­plex process sequences intu­itively, quickly and com­pletely with­out pro­gram­ming knowl­edge.

 

Reduce costs – pre­serve know-how!

Up to now, the usual way of find­ing an indi­vid­ual solu­tion for tem­per­a­ture reg­u­la­tion and sequence con­trol has usu­ally been via pro­gram­ma­ble logic con­trollers, also known as PLCs.

 

An exter­nal PLC pro­gram­mer must be con­sulted for each adap­ta­tion. This often results in high costs, as the aver­age daily rates are around 800 to 1000 euros. In addi­tion, trained PLC pro­gram­mers usu­ally do not have the nec­es­sary process knowl­edge. There­fore, your process engi­neer has to explain the process in detail and thus reveals your know-how to out­siders. Sub­se­quently, an elab­o­rate eval­u­a­tion is nec­es­sary. Again and again, this leads to a loss of com­mu­ni­ca­tion between tech­ni­cians and pro­gram­mers. Even after com­mis­sion­ing, a PLC pro­gram­mer must be con­sulted for each adjust­ment.

 

Pro­mote your inter­nal know-how instead of trans­fer­ring it to the out­side via PLC pro­gram­mers. With the HE 5697 MFC, every process engi­neer is able to cre­ate, opti­mize and mon­i­tor com­plex process con­trols in a very short time.

 

The mul­ti­func­tion con­troller offers the solu­tion!

The multi-func­tion con­troller from HESCH breaks through these cost dri­vers and enables your process engi­neers to imple­ment your desired processes with­out any pro­gram­ming knowl­edge. These can be adapted, opti­mized and fur­ther devel­oped at any time in a cost-neu­tral man­ner.

 

 

 

 

Technical data

HE 5697 MFC
Ver­sorgungss­pan­nung 24 VDC / 100…240 VAC
Stro­mauf­nahme Max. 350 mA (24 V DC)
CPUCor­tex A8, 600 MHz
USB-SchnittstellenRück­seite: 1 × USB 2.0 Host (Typ A)
Front­seite: 1 × Mini-USB 2.0 Device (Typ B), gal­vanisch getrennt
Steck­plätze1 × für Kom­mu­nika­tion­skarte
2 × für E/A-Karten
Relais4 poten­zial­freie Relaisaus­gänge mit Wech­slerkon­tak­ten (230 V AC / 5A; 24 V DC / 5A)
Spe­icherinterner Massen­spe­icher 2 GByte eMMC Spe­icher
DDR2 64 MByte
Flash 256 MByte
MRAM 128 kByte
ja, net­zaus­fall­gepuffert
Anzeige / Bedi­enungTFT mit Hin­ter­grund­beleuch­tung, 320×240 Pixel QVGA, resis­tiver Touch-Screen; 3,5“;
4 frei beleg­bare Tas­ten; 2 pro­gram­mier­bare LEDs für Zus­tand­sanzeigen
GehäuseSchalttafelein­bauge­häuse
Abmes­sun­gen 98 × 98 × 115 mm (ohne Stecker) / 98 × 98 × 130 mm (mit Stecker) (B×H×T)
SchutzartIP65 front­seitig, IP20 restliches Gehäuse

Errors and omis­sions excepted

 

Downloads

Oper­at­ing Instruc­tions HE 5697 MFC – Ger­man

Oper­at­ing Instruc­tions HE 5697 MFC – Eng­lish

Prod­uct brochure HE 5697 MFC – Ger­man

 

    Hier können Sie uns eine Datei senden:

     

    captcha

    ACHTUNG: Zum Absenden des Formulars muss der rechtliche Hinweis mit einem Häkchen bestätigt werden.

    preloader