Switch cab­i­net con­struc­tion

From the indi­vid­ual item to series pro­duc­tion – con­trol cab­i­net con­struc­tion from HESCH


In addi­tion to hard­ware and soft­ware devel­op­ment, we also offer our cus­tomers the devel­op­ment, design and man­u­fac­ture of con­trol cab­i­nets.

At our site in Neustadt near Hanover, we pro­duce switch boxes and con­trol cab­i­nets accord­ing to indi­vid­ual spec­i­fi­ca­tions in com­pli­ance with the rel­e­vant stan­dards and reg­u­la­tions.

Our qual­i­fied employ­ees care­fully inspect each sys­tem and pre­pare a test report before the switch boxes and con­trol cab­i­nets are shipped.

You will receive all the nec­es­sary infor­ma­tion from us, such as cir­cuit dia­gram doc­u­men­ta­tion, man­u­als, reports, pic­tures, data sheets in dig­i­tal form and, on request, also in print.

Com­fort­able and safe – Our con­trol and switch cab­i­net con­struc­tion offers the fol­low­ing advan­tages:

Wiring effort of the indi­vid­ual com­po­nents is com­pletely elim­i­nated

Opti­mized com­mis­sion­ing due to fac­tory pre-para­me­ter­i­za­tion

Avail­able ready to plug in and oper­ate

100 % func­tion test incl. trans­par­ent test pro­to­cols

Guar­an­teed device safety through com­pli­ance with guide­lines and stan­dards

Clear and con­cise: man­u­als for indi­vid­ual com­po­nents in local lan­guage

Stan­dards in con­trol cab­i­net con­struc­tion

We com­ply with all cur­rent stan­dards and guide­lines for equip­ment and plant con­struc­tion.

EMC direc­tive in machine and plant con­struc­tion

UL con­for­mity: The pre­req­ui­site for the Amer­i­can mar­ket

ATEX direc­tives

Switch cabinet for chip extraction

Request your cus­tom quote today.

From plan­ning to con­struc­tion, HESCH is your ser­vice provider for con­trol and switch cab­i­net con­struc­tion.